DIY concrete lamp

Advertisment

Materials:

– Quikrete 5000 Concrete Mix

– electrical socket, switch and cord

– 2 plastic bottles (one larger and one smaller)

– threaded tube and nuts (3/8th inch diameter tube)

– 3 1/2 inch deck screw

– 120 grit sandpaper

– metal can

Tools:

– box cutter or knife

– RYOBI 18 Volt Cordless drill with a 3/8th diameter standard bit for drilling holes in the caps

– wire cutters to cut the cord and strip the wires for reconnecting the socket to the cord after putting the socket inside the lamp

DIY concrete lamp

INGENIOUS CONCRETE LAMP – DIY CONCRETE LAMP

We love DIY with concrete. In very ingenious we made this  vase of glass and concrete  that may also interest you. And whenever we see a DIY lamp we can not resist sharing it. This is a great job of Ben Uyeda for Brit + Co where using as concrete molds plastic bottles joined by metal parts gets a fantastic result. You can see the process in the following images and visit the original source if you have any doubts.

Via Brit + Co

Advertisment
 

RadonSeal Concrete Foundation Crack Repair Kit (10...
RadonSeal Concrete Foundation Crack Repair Kit (10 ft) - The Homeowner's Solution to Fixing Basement Wall Cracks Like The Pros!

View

  1. NO DRILLING REQUIRED – The low-pressure injection method eliminates the need for drilling.
  2. HAIRLINE CRACKS – Low-viscosity, 2-component, injection urethane is suitable for the repair of hairline cracks.
  3. NO NEED TO EXCAVATE – Save serious money by repairing the crack from the inside.
  4. NO SPECIAL TOOLS REQUIRED – Use a standard caulking gun to inject.
  5. PERMANENT - Prevents water seepage permanently! Imperious to water vapor, soil gases, and even radon.

Vitrust Walking Path Maker DIY Walkway Maker Mold ...
Vitrust Walking Path Maker DIY Walkway Maker Mold Patio Path Mold Maker Garden Lawn Concrete Paving Path Mold Walkway Mold

View

  1. Patio garden path driveway maker mold, easy to use. Just fill mold with concrete, smooth surface, and remove mold and you're done.
  2. Material: easy to clean PP resin, color: black, size: 17.12*17.12*1.57 inch/43.5*43.5*4 cm, weight(approx): 0.88kg
  3. Use heavy-duty plastic mold that turns a little pre-mixed concrete into a concrete garden stepping stones for easiest access way to your garden.
  4. 9-stone pattern to suit any patio, walkway or driveway
  5. DIY walkway with any color,creat a style of your own garden path as you want

CrackWeld DIY Concrete Floor Repair Kit (4-Pack) -...
CrackWeld DIY Concrete Floor Repair Kit (4-Pack) - Repair Concrete Cracks in Basements, Driveways, Garages, Patios, & Pool Decks

View

  1. Permanently repair cracks in concrete floors and slabs (hairline up to 1/2 inch wide)
  2. No need to route the cracks prior to application
  3. Fills the full depth of the crack and cures as a rigid compound that is stronger than concrete
  4. Complete kit includes all materials needed - you only need a standard caulking gun
  5. Repair up to 100-linear feet of crack

WOVTE DIY Walk Maker Concrete Stepping Stone Mold ...
WOVTE DIY Walk Maker Concrete Stepping Stone Mold Garden Lawn Pathmate Stone Mold

View

  1. Material: PP Resin.Color: Black.Size: 43.5*43.5*4cm/17.12*17.12*1.57 inch
  2. It is a reusable plastic mold for creating patterned walks, path, patios
  3. Help you to decorate your backyard landscaping
  4. Use heavy-duty plastic mold that turns a little pre-mixed concrete into a concrete garden stepping stones for easiest access way to your garden
  5. Keep the beauty and health of your plant by using garden steppingstones as your path way