How to Make a Bench from Cinder Blocks

Page 3 of 10
Advertisment

3 – Blue cinder block bench

3 – Blue cinder block bench -   How to Make a Bench from Cinder Blocks

source

Advertisment
Advertisment
 

KILZ Basement and Masonry Waterproofing Paint, Int...

KILZ Basement and Masonry Waterproofing Paint, Interior/Exterior, White, 1 Gallon

View

  1. This premium, interior/exterior paint is formulated to waterproof and seal porous concrete and masonry surfaces both inside and outside your home.
  2. Using nanotechnology, this paint forms a barrier to help stop water infiltration while an alkali resistant coating provides a long-lasting, durable and decorative finish.
  3. Apply this paint on properly prepped and cured above and below grade basement walls, masonry walls, retaining walls, cinder and concrete blocks, stucco and brick. Do not use on floors or on walls with active water leaks. Apply using a high quality 1/2"-3/4" nap roller, 4" nylon/polyester brush or an airless sprayer capable of delivering 2200-3200 PSI or greater using a .023"-.025" spray tip.
  4. Prime all uncoated, patched, chalky, and adjacent wood and/or metal surfaces with KILZ Premium Primer. For below grade application, fill all holes/cracks with hydraulic cement prior to painting. A minimum of two coats of this product are required for optimal results. Paint dries to touch in one hour and can be re-coated in 4 hours depending on humidity.
  5. This is a 1-gallon can of Interior/Exterior Basement and Masonry Waterproofing Paint, White, 1-gallon in white. Depending on surface porosity, 1 gallon covers 75 to 125 square feet per.

Masonry & Stucco Paint, Beige, 1 gal....

Masonry & Stucco Paint, Beige, 1 gal.

View

  1. Price For: Each Coverage: 200 to 300 sq. ft./gal. Finish: Semi-Gloss Dry Time Recoat: 4 hr. Item: Exterior Paint Application Method: Brush, Roll, Spray Size: 1 gal. Green Environmental Attribute: VOC Levels Meet SCAQMD Requirements
  2. Surface: Interior and Exterior Use on Masonry, Brick, Cement, Concrete Block, Cinder Block, Stucco, Wood, Hardboard, Aluminum, Fiber Board, Vinyl Siding or Trim, Plaster, New or Coated Acoustic Ceiling, and Previously Painted or Primed Metal Dry Time: 30 min. Paint Color Family: Beiges VOC Content: 15g/L Color: Beige Country of Origin (subject to change): United States

Drylok 275 Masonry Waterproofer Water-Based White,...

Drylok 275 Masonry Waterproofer Water-Based White, 5-Gallon Pail

View

  1. GUARANTEED to stop water - withstands 10 pounds of hydrostatic pressure (PSI), equivalent to a wall of water 22 feet high
  2. Fully transferable 10 Year Warranty
  3. Helps protect against radon gas penetration by reducing vapor transfer
  4. Low-odor formula complies with all current VOC requirements
  5. Breathable film will not trap moisture in the masonry
  6. No pre-mixing or pre-wetting necessary
  7. Withstands 10 pounds of hydrostatic pressure, greater than a wall of water 22 feet high
  8. A breathable film - does not trap moisture in masonry. Applies easily with brush and/or roller and cleans up with soap and water
  9. Complies with all current VOC and/or VOS
  10. 10-year warranty. Tintable

DAP 8675 Silicone Plus Concrete Raw Building Mater...

DAP 8675 Silicone Plus Concrete Raw Building Material, 10.1 oz, Gray

View

  1. Adhesives & Sealants
  2. Country of manufacture: United States
  3. Manufacturer: Dap
  4. Outstanding adhesion to concrete, mortar, cinder block, stucco, brick and limestone
  5. Ideal for caulking and sealing driveways, sidewalks, patios, exterior masonry, above-ground foundations and tuck-pointing between various types of masonry
  6. All temperature from -35ΒΊ F to 140ΒΊ F
  7. All weather
  8. Gray

RadonSeal Plus Deep-Penetrating Concrete Sealer (2...

RadonSeal Plus Deep-Penetrating Concrete Sealer (2.5-Gallon) - Basement Waterproofing & Radon Mitigation Sealer | Seals Concrete Against Water, Vapor, and Radon Gas

View

  1. Penetrates Concrete (up to 4") – Internally seals the matrix of concrete, blocking the micro-pores and capillaries to prevent capillary water seepage, water vapor, efflorescence, and radon gas directly through concrete. Ideal for use on basement floors, interior basement walls, foundation walls, slab-on-grade, indoor and outdoor poured concrete slabs and walls.
  2. Hardens & Strengthens Concrete – Helps to protect and reduce Concrete Dusting, Crazing, Damage Caused by Salts, De-Icing Chemicals, and Freeze Thaw. Breathable, does not trap moisture!
  3. ECO-Friendly & Easy to Apply Formula – ZERO VOCs, No fumes or Noxious Odors, No Solvents, Non-Toxic, Non-Flammable. Water-based.
  4. Permanent & Paintable – No Reapplication Needed; the seal becomes integral to the concrete itself. Resistant to Hydrostatic Water Pressure. Penetrating sealer that does not form a surface film; no peeling or fading. Leaves surface Paintable.
  5. Commercial-Grade backed by a Money-Back Guarantee - Trusted Concrete Sealer Since 1997

PC Products PC-Masonry Epoxy Adhesive Paste, Two-P...

PC Products PC-Masonry Epoxy Adhesive Paste, Two-Part Repair, 32 oz in Two Jars, Gray 73209

View

  1. Two-part masonry repair epoxy adhesive paste replaces missing concrete or fills cracks on deteriorating masonry
  2. Resists moisture and can be applied to both wet and dry surfaces
  3. Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F, and a service temperature range of -20 to +200 degrees F
  4. Non-sagging paste can be used on horizontal and overhead surfaces
  5. Can be painted, stained, and machined after fully cured

RadonSeal Plus Deep-Penetrating Concrete Sealer, B...

RadonSeal Plus Deep-Penetrating Concrete Sealer, Basement Waterproofing & Radon Mitigation in One | Seals Concrete Against Water, Vapor, and Radon Gas (5-Gallon)

View

  1. Penetrates Concrete (up to 4") – Internally Seals the Matrix of Concrete, Blocking the Pores and Capillaries to Prevent Water Seepage, Water Vapor, and Radon Gas. Ideal for use on basement floors, interior basement walls, foundation walls, slab-on-grade, indoor and outdoor poured concrete slabs and walls.
  2. Hardens & Strengthens Concrete – Helps to Protect Against and Reduce Concrete Dusting, Efflorescence, Damage Caused by Salts, De-Icing Chemicals, and Freeze Thaw. Does Not Trap Moisture.
  3. ECO-Friendly & Easy to Apply Formula – ZERO VOCs, No Odors, No Solvents, Non-Toxic, Non-Flammable. Water-based.
  4. Permanent & Paintable – No Reapplication Needed. Resistant to Hydrostatic Water Pressure. Does Not Form a Surface Film. No Peeling or Fading. Leaves Surface Paintable. Great Primer for Epoxies, Tiles, and Overlay Flooring.
  5. Commercial-Grade Backed by a Money-Back Guarantee - Trusted Since 1997

Loctite Epoxy Metal/Concrete, 0.85 fl oz, 1, Syrin...

Loctite Epoxy Metal/Concrete, 0.85 fl oz, 1, Syringe

View

  1. For Concrete and Metal Projects: Permanent, high-strength bond works great on railings, awnings, posts, brick, concrete and cinderblock without conducting electricity
  2. Fast and Professional: High-strength epoxy sets in just 5 to 12 minutes to a metallic grey finish to blend with metal and concrete
  3. Two-Part Adhesive: Convenient double syringe applicator dispenses equal parts epoxy resin and hardener for a tough, rigid, high-strength bond
  4. Resilient: Does not shrink and is resistant to humidity and water, most common solvents, and has high impact resistance and can be sanded, drilled, and painted
  5. Multi-Purpose: Versatile epoxy can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass or as a filler for gap filling, surface repairs and laminating

PC Products PC-Masonry Epoxy Adhesive Paste, Two-P...

PC Products PC-Masonry Epoxy Adhesive Paste, Two-Part Repair, 128 oz in Two Pails, Gray 71120

View

  1. Two-part masonry repair epoxy adhesive paste replaces missing concrete or fills cracks on deteriorating masonry
  2. Resists moisture and can be applied to both wet and dry surfaces
  3. Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F, and a service temperature range of -20 to +200 degrees F
  4. Non-sagging paste can be used on horizontal and overhead surfaces
  5. Can be painted, stained, and machined after fully cured

Red Devil 0913 Foam & Fill Small Gaps & Cr...

Red Devil 0913 Foam & Fill Small Gaps & Cracks Expanding Polyurethane Sealant, 12 oz, Off-White, Pack of 1

View

  1. FILLS SMALL HOLES, GAPS & CRACKS: Ideal for insulating and preventing drafts
  2. USE INSIDE OR OUTSIDE: Can be used anywhere around the home
  3. SANDABLE, PAINTABLE & STAINABLE: Can be sanded, painted or stained after curing
  4. ADHERES TO: Painted and unpainted wood, concrete, cinder block, aluminum & fiberglass
  5. SOLVENT CLEAN UP: Requires the use of a solvent for cleanup
  6. Use for Gaps & Cracks up to 1" in size
  7. Seals, Bonds & Insulates
  8. Fills holes up to 1" in ceilings floorboards concrete and cinder block walls

Makita 7 Piece - Complete Concrete Drill Bit Set f...

Makita 7 Piece - Complete Concrete Drill Bit Set for Hammer Drills - Precise Drilling for Light Masonry & Concrete

View

  1. βœ… Makita's Complete ROUND Shank Drill Bit Kit For Rounded Chuck Hammer Drills with 7 Premium, Long-Lasting, Light-Duty, Tungsten Carbide Tipped Pilot Bits that prepare the way for EASY & RELIABLE Screwing, Anchoring and Fastening into 4 Inch Masonry like Light Concrete, Brick & Cinder Block
  2. βœ… 7 ROUND SHANK DRILL BIT SET with all needed sizes includes: 2 Bits of 3/16" + 2 Bits of 1/4" + 1 Bit of 5/32" + 1 Bit of 5/16" + 1 Bit of 3/8" | Engineered in Japan for optimal use with Makita 3/8" & 1/2" Chuck Hammer Drills while also fully compatible with Rounded 3/8" & 1/2" Chuck Hammer Drills
  3. βœ… EASILY Drill LONGER & PRECISELY into 4" Light Concrete, Brick & General Masonry with Makita’s Reinforced Premium Tungsten Carbide Tip & Steel Bit Integrity for unmatched LONG LIFE, SAFE Drilling & RELIABLE Screwing & Fastening, while Drill bit flute design allows for maximal amount of concrete removal for both EASE OF USE and EFFECTIVENESS in concrete/masonry drilling applications
  4. βœ… AVOID LOWER PRICED & lower quality bits that wobble, prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective anchoring & fastening and making the overall drilling much more difficult | Makita makes concrete drilling EASY, FAST & RELIABLE, with the right sizes for the most common Tapcon screws and holes. Please see sizing chart image for the corresponding pilot drill bit & fastener diameters
  5. βœ… Engineered for 3/8" & 1/2" Standard Chuck Hammer Driver Drills, these Bits are IDEAL for General Contractors, DIY, or Homeowners who need a wide variety of concrete drill bit sizes and lengths, all conveniently placed and sleeve protected in a set specifically designed for the most common used sizes in concrete drilling applications

Dasco G480 Concrete Chisel with TargetGuard, 3/4-I...

Dasco G480 Concrete Chisel with TargetGuard, 3/4-Inch by 12-Inch

View

  1. Durable, yellow plastic guard is permanently molded to steel tool to protect against misplaced blows
  2. Product is manufactured in United States
  3. This product meets customer requirement
  4. The target head has been designed to help protect hands from missed hits and to reduce mushrooming from repeated blows
  5. Ideal for cutting or shaping brick, cement block, cinder block, or trimming excess mortar
  6. Always wear eye protection
  7. Made in the USA

Vermont American 14107 Rotary Hammer Bit, 7/16-Inc...

Vermont American 14107 Rotary Hammer Bit, 7/16-Inch by 6-Inch

View

  1. Use rotary hammer bits for drilling in concrete, stone, brick and cinder block
  2. A specially formulated carbide tip withstands impact sustained from hammer drills
  3. Entire length of bit is fully hardened to Rockwell 45 C for extra strength